|
|
Accessories
|
PAT-0.1-20 Tuned Pre-Amplifier
The PAT-0.1-20 is a low-noise, high-impedance, pre-amplifier designed to cover the frequency range of 0.1 to 20 MHz. The gain is approximately 40 dB and the output impedance is 50 Ohms. Tuning is accomplished with eight switch-selectable ranges, plus a screwdriver vernier (2:1) adjustment. In addition, a 10:1 bandwidth control is included to optimize signal-to-noise and signal resolution. The output will drive 1 V peak-to-peak (Vpp) into a 50 Ohm load. ± 18 V power is normally supplied from a RAM system. However, the unit will work with ± 15 V supplies |
|
RITEC Inc.
60 Alhambra Road Suite 5 Warwick, RI 02886 |