Software
All the software has been archived using Winzip compression software. This can be downloaded from www.Winzip.com. The files are self-extracting archive files, which should probably be run under Windows 95, 95 OSR2, 98, 98se and ME.
SNAP System
Original SNAP software for systems with the RM-24A gated integrator [eight (8) settings for the integrator rate]and the ADAC-5632 interface (default).
Revised SNAP software for systems with the RM-106A gated integrator [sixteen (16) settings for the integrator rate] and the ADAC-5632 interface (default).
SNAP software for systems with the optional GPIB (IEEE-488) interface.
Software uses National Instruments IEEE.1 style commands
Requires new National Instruments Windows driver with DOS support
Revised SNAP software for systems with the RM-24A gated integrator with eight (8) integrator rate settings and the ADAC-5632 interface (default). Contributed by Cornell University. The software is web browser based, using JAVA. Software controls the instrument, only. It does not have any measurement routines.
RAM-5000 Systems
Original Mark VI (Mark 6) software for complete measurement systems with the RM-24A gated integrator [eight (8) settings for the integrator rate] and the ADAC-5632 interface (default).
Original Mark IV (Mark 4) software for pulser/receiver systems with the ADAC-5632 interface (default).
RAM-10000 Systems
Original Mark VI (Mark 6) software for complete measurement systems with the RM-24A gated integrator [eight (8) settings for the integrator rate] and the ADAC-5525 interface (default).
Original Mark IV (Mark 4) software for systems with the ADAC-5525 interface (default). This system is a standalone computer controlled pulser/receiver.
Original Mark III (Mark 3) software for systems with the ADAC-5525 interface (default). This system is a standalone computer-controlled pulser.
Original Mark II (Mark 2) software for systems with the ADAC-5525 interface (default). This system is a computer-controlled gated amplifier which requires an external synthesizer as the signal source.
GA-10000 Gated Amplifier System
GA-10000 software for systems with the ADAC-5525 interface (default). This system is a computer-controlled gated amplifier which requires an external synthesizer as the signal source.
