The following application notes are available as *.pdf files. You will need the widely available acrobat reader to view these files.

Ultrasonic Phase and Group Velocity Measurements

The document above is provided to try to clarify a common problem we see from our customers regarding to measurements of phase and group velocity with RITEC instrumentation.

L-Matching the Output of a RITEC Gated Amplifier
to an Arbitrary Load

This note gives information about matching transmitter impedances to both EMATs and piezo-electric transducers. The use of RITEC Gated Amplifiers is discussed.

Winding Solenoid Inductors for use in
High Power Matching Networks

Information about winding coils with an air or non-ferromagnetic core to avoid saturation and easily fabricate almost any inductance value.

Operating Instructions and Instrumentation Notes

Measuring EMAT Impedances Using a RITEC RAM System

RITEC RT-50-B High Power 50 Ohm Terminations

Operating Instructions: Gated RF Pulse Amplifier Model GA 2500

Operating Instructions: PAS-0.1-20 Pre-Amplifier

Operating Instructions: Clamped Diplexer Model RCDX-2

Operating Instructions: RDX-6 Diplexer

Operating Instructions: Peripheral Power Supply Model RPS-2

Installation of the adac5525 Data Acquisition Card
in "Plug-and-Play" Systems

Installation of the adac5632ttl Data Acquisition Card
in "Plug-and-Play" Systems

Installation of the AAC-4801/DT-2801 Data Acquisition board
in "Plug-and-Play" Systems