|
Authors
|
Title
|
Journal
|
|
Alers, G.A.; Purtscher,
P.; Breedis, J.F. and Mandigo, F.N.
|
Monitoring
of Texture Development in Copper-Alloy Sheet
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
189-195
|
|
Berndt, T.P. and
Green R.E.
|
Feasibility
Study of a Nonlinear Ultrasonic Technique to Evaluate Adhesive Bonds
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
125-131
|
|
Bond, LJ; Chiang,
CH; Fortunko, CM
|
Absorption
of Ultrasonic Waves in air at High Frequencies (10-20 MHz)
|
J Acoust Soc Am 92
(4) Pt 1 Oct 1992, pp. 2006-2015
|
|
Breazeale, M &
Philip, J
|
Determination
of Third Order Elastic Constants from Ultrasonic Harmonic Generation
Measurements
|
Physical Acoustics,
Vol XVII, Mason & Thurston eds, 1984 Academic Press, pp. 1-60
|
|
Chimenti, DE; Fortunko,
CM
|
Characterization
of composite Pre-Preg with Gas-Coupled Ultrasonics
|
Ultrasonics 1994
Vol 32 No 4 pp.261-264
|
|
Cho, Younho; IEEE;
Hongerholt, D.D. & Rose, J.L.
|
Lamb Wave
Scattering Analysis for Reflector Characterization
|
IEEE Trans on Ultrasonics...,
Vol 44, No 1, Jan 1997, pp 44-52
|
|
Clark, AV; Fortunko,
CM; Lozev, MG; Schaps & Renken
|
Determination
of Sheet Steel Formability Using Wide Band Electromagnetic-Acoustic
Transducers
|
Res Nondest Evaluation
Vol 4 No 3 1992 pp.165-182
|
|
Clark, AV; Schaps,
SR
|
Measurement
of Plane Stress states Using Electromagnetic Acoustic Transducers
|
Rev Progress in QNDE,
Vol 14, eds DO Thompson & DE Chimenti: (Plenum Press, NY) pp 1877-1882
|
|
Clark, AV, Fuchs,
P Schaps, SR
|
Fatigue Load
Monitoring in Steel Bridges with Rayleigh Waves
|
Journal of Nondestructive
Evaluation Vol 14 No 3 1995 pp 83-98
|
|
Clark, A.V.; Fuchs,
P.A.; Lozev, M.G.; Gallagher, D. and Hehman, C.S.
|
Ultrasonic
Measurement of Stress in Bridges
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
481-486
|
|
Fitting, DW; Fortunko,
CM
|
A Hemispherical
Test Fixture for Measuring the Wavefields Generated in an Anisotropic
Solid
|
|
|
Fitting, DW; Norton,
SJ; Fortunko, CM
|
Adaptive
Array Imaging in Inhomogenous Media
|
|
|
Fortunko, CM; Petersen,
GL; Chick, BB; Renken; Preis
|
Absolute
Measurements of Elastic-Wave Phase and Group Velocities in Lossy Materials
|
Rev Sci Instr 63
(6) June 1992 pp 3477-3486
|
|
Fortunko, CM; Hamstead,
MA; Fitting, DW
|
High fidelity
Acoustic-Emission Sensor/Preamplifier Subsystems: Modeling and Experiments
|
|
|
Fortunko, CM; Schram,
RE; McClosckey; Teller, CM; Light, GM; Dube, WP; Renken, MC
|
Gas-Coupled,
Pulse-Echo Ultrasonic Crack Detection and Thickness Gauging
|
Rev Progress in QNDE,
Vol 14, eds DO Thompson & DE Chimenti: (Plenum Press, NY)
|
|
Fortunko, CM; Strycek,
JO; Grandia, WA
|
Nondestructive
Testing of "Thick" Aerospace Honeycomb Structures Using Through-Transmitted
Ultrasonic Guided Waves
|
|
|
Fortunko, C.M.; Schramm,
R.E. and Jackson, J.L.
|
Gas-Coupled
Ultrasonics for High-Pressure Pipeline Inspection
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
575-580
|
|
Fukuoka, H.; Hirao,
M.; Yamasaki, T.; Ogi, H.; Petersen, G.; & Fortinko, C.
|
Ultrasonic
Resonance Method with EMAT for Stress Measurement in Thin Plates
|
|
|
Hein, I.A.; Novakofski,
J.A. & O'Brien, W.D.
|
Ultrasound
Data Acquisition System Design for Collecting High Quality RF Data from
Beef Carcasses in the Slaughterhouse Environment
|
|
|
Heyliger, P; Ledbetter,
H; Austin, M
|
Resonating
Orthotropic Cube Method for Elastic Constants
|
Dynamic Elastic Modulus
Measurements in Materials Alan Wolfenden ed ASTM STP 1045, 1990 pp 100-109
|
|
Hikata, A.; Chick,
B. & Elbaum, C.
|
Dislocation
Contribution to the Second Harmonic Generation of Ultrasonic Waves
|
Journal of Applied
Physics, Vol 36, No. 1, 229-236, January 1965
|
|
Hikata, A.; Chick,
B. & Elbaum, C.
|
Effect of
Dislocations on Finite Amplitude Ultrasonic Waves in Aluminum
|
Applied Physics Letters,
Vol 3, No. 11, 1 December 1963, pp 195-197
|
|
Hirao, M; Ogi, H
& Fukuoka, H
|
Method of
Electromagnetic Acoustic Resonance for Measuring Rail Axial Stress
|
4th Far
East Conference on NDT, Cheju-do (Korea), 1997, pp.255-263
|
|
Hirao, M; Ogi, H;
Suzuki, N & Ohtani, H
|
Ultrasonic
Attenuation Peak During Fatigue Test of Pure copper Observed with Electromagnetic
Acoustic Resonance (EMAR)
|
Proc. 1998 IEEE Ultrasonic
Symp., Sendai (Japan) 1998, pp. 835-838
|
|
Hirao, M. & Ogi,
H
|
Electromagnetic
Acoustic Resonance and Materials Characterization
|
Ultrasonics, 35,
pp. 413-421 (1997)
|
|
Hirao, M. & Ogi,
H
|
An SH-Wave
EMAT Technique for Gas Pipeline Inspection
|
NDT & E International,
32, pp. 127-132 (1999)
|
|
Hirao, M; Ogi, H;
Ohtani, T & Morishita, H
|
Noncontact
Ultrasonic Spectroscopy for Detecting Creep Damage in 2.25Cr-1Mo Steel
|
Nondestructive Characterization
of Materials in Aging Systems (Materials Res Soc. Vol 503) eds Rl Crane
et al, 1998, pp.31-36
|
|
Hirao, M; Ogi, H.;
Fukuoka, H
|
Advanced
Ultrasonic Method for Measuring Rail Axial Stresses with Electromagnetic
Acoustic Transducer
|
Res Nodest Eval (1994)
5 pp. 211-223
|
|
Hirao, M; Ogi, H
|
Electromagnetically
excited Acoustic Resonance for Evaluating Attenuation Coefficient and
Grain Size in Polycrystalline Metals
|
App Phys Lett 64
(17) 25 April 1994 pp 2217-2219
|
|
Hirao, M; Yokota,
K; Fukuoka, H
|
Interferometric
Measurement of Ultrasonic Velocities with Line-Focusing P(VDF-TrFE)
Transducer: V(f) Curves
|
Rev Progress in QNDE,
Vol 14, eds DO Thompson & DE Chimenti: (Plenum Press, NY, 1995)
p 931
|
|
Hirao, M; Ogi, H;
Yamasaki, T & Fukuoka, H
|
Electromagnetic
Acoustic Resonance Method for Measuring Stresses in Metal Plates
|
Nondestructive Characterization
of Materials, Vol 6, eds RE green Jr Et al., (Plenum Press, New york,
1994) pp. 391-396
|
|
Hirao, M; Fukuoka,
H; Fujisawa, K; Muryama, R
|
On-Line Measurement
of Steel Sheet r-Value Using Magnetostrictive-Type EMAT
|
Journal of NDE Vol
12 No 1 1993 pp 27-32
|
|
Hirao, M; Ogi, H;
Fukuoka, H
|
Resonance
EMAT system for Acoustoelastic Stress Measurement in Sheet Metals
|
Rev Sci Instr 64
(11) Nov 1993 pp 3198-3205
|
|
Hirao, M; Fukuoka,
H; Koga, H
|
Ultrasonic
Backscattering Noise and Texture in Pure Titanium
|
Rev Progress in QNDE,
Vol 13, eds DO Thompson & DE Chimenti: (Plenum Press, NY, 1994)
p 1601
|
|
Hirao, M; Tojo, K;
Fukuoka, H
|
Small Fatigue
Crack Behavior in 7075-T651 Aluminum as Monitored with Rayleigh Wave
Reflection
|
Metallurgical Transactions
Vol 24A Aug 1993 pp 1773-1783
|
|
Hirao, Masahiko
|
Electromagnetic
Acoustic Resonance and Materials Characterization
|
Asian-Pacific Conf
on NDT Dec 11-14, 1995 Taipei, Taiwan
|
|
Hollman, K.W.; Purtscher,
P.T. and Fortunko, C.M.
|
Characterizing
Martensitic Steel with Measurements of Ultrasonic Velocity
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
223-227
|
|
Hurley, DC; Yost,
WT; Boltz, ES; Fortunko, CM
|
A Comparison
of Three Techniques to Determine the Non-Linear Ultrasonic Parameter
b
|
Rev Progress in QNDE,
1996, eds DO Thompson & DE Chimenti: (Plenum Press, NY)
|
|
Hurley, D.C.; Purtscher,
P.T.; Hollman, K.W. and Fortunko, C.M.
|
Nonlinear
Ultrasonic Properties of As-Qucnched Steels
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
825-829
|
|
Hwang, EC; Ahn, B;
Lee, SS; Jhang, K
|
Development
of Magnetostrictive type EMAT for Measurement of Plastic Anisotropy
in Korean only
|
KSNT seminar 5/19/95
|
|
Igarashi, B., Alers,
GA., Purtscher, PT.
|
Magnetostrictive
EMAT Efficiency as a Materials Characterization Tool
|
Rev Progress in QNDE,
Vol ? (Plenum Press, NY) 1997
|
|
Igarashi, B., Alers,
GA., Purtscher, PT.
|
An Ultrasonic
Measurement of Magnetostriction
|
1997 IEEE Ultrasonics
Symposium
|
|
Igarashi, B.; Alers,
G.A. and Purtscher, P.T.
|
Magnetostrictive
EMAT Efficiency as a Nondestructive Evaluation Tool
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
197-203
|
|
Jhang, Kyung-Young
and Kim, Kyung-Cho
|
Evaluation
of material degradation using nonlinear acoustic effect
|
Ultrasonics 37 (1999)
39-44
|
|
Johnson, W; Auld,
BA; Alers, GA
|
Spectroscopy
of Resonant Torsional Modes in Cylindrical Rods Using Electromagnetic-Acoustic
Transduction
|
|
|
Johnson, Ward; Alers,
GA
|
Noncontacting
Ultrasonic resonance Measurement of Transverse Anisotropy in Cylinders
|
Rev Progress in QNDE
Vol 14 Ed DO Thompson & DE Chimenti Plenum, NY p. 1915
|
|
Johnson, Ward
|
Ultrasonic
Damping and Velocity During Recovery and Recrystallization of Aluminum
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
145-150
|
|
Jung, J.K., Seo,
Y.M., Choh, S.H., Park, Y.M. and Song, S.K.
|
14N NQR Relaxation in Mixed Complex system [(CH2)6N4]1-x
[NaNO2]x
|
Jrnl of the Korean
Physical Society, Vol 32, feb 1998, pp. S665-S668
|
|
Kawashima, K; Wright,
OB
|
Resonant
Electromagnetic Excitation and Detection of Ultrasonic Waves in Thin
Sheets
|
Journ App Physics
Vol 72 No 10 15 Nov 1992 pp 4830-4839
|
|
Livingston, R.A.;
Johnson, W.; McColskey, D.; Fortunko, C. and Alers, G.
|
Measurement
of Material Properties for Early Detection of Fatigue Damage in Highway
Bridge Steels
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
475-480
|
|
Martin, S; Granstaff,
VE; Frye, GC
|
Characterization
of a Quartz Crystal Microbalance with Simultaneous Mass and Liquid Loading
|
Analytical Chemistry
Vol 63 No 20 1991 pp 2272-2281
|
|
Morgan, K.; Dayton,
P.; Klibanov, S.; Brandenburger, G.; Kaul, S.; Wei, K. & Ferrara,
K.
|
Properties
of contrast agents insonified at frequencies above 10 MHz.
|
1996 IEEE Ultrasonics
Symposium, pp 1127-1130
|
|
Muryama, Riichi
|
Study of
driving mechanism on electromagnetic acoustic transducer for Lamb wave
using magnetostrictive effect and application in drawability evaluation
of thin steel sheets
|
Ultrasonics 37 (1999)
31-38
|
|
Ogi, H; Hirao, M.
& Fukuoka, H
|
Noncontacting
Ultrsonic Measurement of Bolt Axial Stress with Electromagnetic Acoustic
Transducer
|
Proc First US-Japan
Symp. On Advan. In NDT, Hawaii (USA), 1996, pp. 37-42
|
|
Ogi, H & Hirao,
M.
|
Ultrasonic
Measurement of Bending Stresses in Electric-Resistance-Welded Pipe by
Electromagnetic Acoustic Resonance
|
Proc. The 14th
World Conf on NDT, eds CG Krishnadas et al, New Delhi (India), 1996,
pp. 875-878
|
|
Ogi, H; Suzuki, N
& Hirao, M
|
Electromagnetic
Acoustic Resonance for Studying Dislocation Formation in Polycrystalline
Pure Copper During Deformation
|
Proc. 1997 IEEE Ultrasonics
Symp., Toronto (Canada), 1997, pp. 507-510
|
|
Ogi, H; Hirao, M
& Ohtani, T
|
Flaw Detection
by Line-Focusing Electromagnetic Acoustic Transducers
|
Proc. 1997 IEEE Ultrasonics
Symp., Toronto (Canada), 1997, pp. 653-656
|
|
Ogi, H & Hirao,
M.
|
An SH-Wave
EMAT Technique for Monitoring Pipe Corrosion
|
ASNT's 1998 Spring
conf, Anaheim (USA), 1998, pp. 180-183
|
|
Ogi, H & Ledbetter,
H
|
Contactless-Mode
Selective Resonance Ultrasound Spectroscopy
|
1999 Resonance Meeting,
Oxford (USA), 1999
|
|
Ogi, H; Hirao, M;
Minoura, K.
|
Noncontact
Measurement of Ultrasonic Attenuation during Rotating Fatigue Test of
Steel
|
J. Appl. Phys., 81,
pp. 3677-3684 (1997)
|
|
Ogi, H.
|
Field Dependence
of Coupling Efficiency between Electromagnetic Field and Ultrasonic
Bulk Waves
|
J. Appl. Phys., 82,
pp. 3940-3949 (1997)
|
|
Ogi, H.; Hirao, M
& Ohtani, H
|
Line- Focusing
of Ultrasonic SV Wave by Electromagnetic Acoustic Transducer
|
J. Acoust. Soc. Am.,
103, pp. 2411-2415 (1998)
|
|
Ogi, H; Suzuki, N
& Hirao, M
|
Noncontact
Ultrasonic Spectroscopy on Deforming Polycrystalline Copper; Dislocation
Damping and Acoustoelasticity
|
Metal. And Mater.
Trans. A., 29A, pp. 2987-2993, (1998)
|
|
Ogi, H., Hirao, M,
& Ohtani, T.
|
Line-focusing
Electromagnetic Acoustic Transducers for Detection of Slit Defects
|
IEEE Trans. Ultra.
Ferro. Freq. Ctl., 46, pp. 341-346 (1999)
|
|
Ogi, H., Ledbetter,
H., Kim, S. & Hirao, M.
|
Contactless
Mode-Selective Resonance Ultrasound Spectroscopy: Electromagnetic Acoustic
Resonance
|
J. Acoust. Soc. Am.,
106, pp. 660-665 (1999)
|
|
Ogi, H, Takashima,
K, Ledbetter, H, Dunn, M, Shimoke, G, Hirao, M & Bowen, P
|
Elastic Constants
and Internal Friction of an SiC-Fiber-Reinforced Ti-Alloy-Matrix Crossply
Composite: Measurement and Theory
|
Acta Materialia,
47, pp. 2787-2796 (1999)
|
|
Ogi, H, Tsujimoto,
A, Hirao, M & Ledbetter, H
|
Stress-Dependent
Recovery of Point Defects in Deformed Aluminum: An Acoustic-Damping
Study
|
Acta Materialia,
47, pp. 3745-3751 (1999)
|
|
Ogi, H., Hirao, M
& Minoura, K
|
Generation
of Axial Shear Acoustic Resonance by Magnetostrictively Coupled EMAT
|
Rev of Prog in QNDE,
Vol 15, eds D.O. Thompson & D.E. Chimenti (Plenum Press, New York,
1996) pp. 1939-1944
|
|
Ogi, H., Hirao, M.
& Nozaki, A
|
Ultrasonic
Response in Nd-Fe-B Sintered Material During Elastic Deformation
|
Rev of Prog in QNDE,
Vol 16, eds D.O. Thompson & D.E. Chimenti (Plenum Press, New York,
1997) pp. 1677-1682
|
|
Ogi, H., Shimoike,
G., Hirao, M., Takeshima, K., Ohtani, H., & Ledbetter, H.
|
Electromagnetic
Acoustic Resonance of SiCf/Ti Composites at Elevated Temperatures
|
Rev of Prog in QNDE,
Vol 18, eds D.O. Thompson & D.E. Chimenti (Plenum Press, New York,
1999) pp. 1337-1342
|
|
Ogi, H; Hirao, M;
Honda, T; Fukuoka, H
|
Absolute
Measurement of ultrasonic Attenuation by Electromagnetic Acoustic Resonance
|
Rev Progress in QNDE,
Vol 14, eds DO Thompson & DE Chimenti: (Plenum Press, NY) p 1601
|
|
Ogi, H; Hirao, M;
Honda, T; Fukuoka, H
|
Ultrasonic
diffraction from a transducer with arbitrary geometry and strength distribution
|
J Acoust Soc Am 98
(2) Pt 1 Aug 1995 pp 1191-1198
|
|
Ogi, Hirotsugu;Hirao,
Masahiko; Honda, Takashi
|
Ultrasonic
attenuation and grain-size evaluation using electromagnetic acoustic
resonance
|
J Acoust Soc Am 98
(1) July 1995 pp 458-464
|
|
Ogi, H. and Hirao,
M
|
Ultrasonic
Noise Relaxation for Evaluating Thermal aging Embrittlement of Duplex
Stainless Steels
|
Res Nondest Evaluation
Vol 9 No 3 1997 pp 171-180
|
|
Ogi, H. and Hirao,
M.
|
Electromagnetic
Acoustic Spectroscopy in the Bolt Head for Evaluating the Axial Stress
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
671-676
|
|
Ohtani, H; Ogi, H
& Hirao, M
|
Monitoring
of Fatigue Damage in Pure Copper with Electromagnetic Acoustic Resonance
|
Rev of Prog in QNDE,
Vol 16, eds D.O. Thompson & D.E. Chimenti (Plenum Press, New York,
1997) pp. 1487-1494
|
|
Ohtani, H; Ogi, H
& Hirao, M
|
Advanced
EMAT-Resonant Technique for Assessment of Damage Accumulation and Remaining
Life of Crept Stainless Steel
|
Rev of Prog in QNDE,
Vol 18, eds D.O. Thompson & D.E. Chimenti (Plenum Press, New York,
1999) pp. 1847-1854
|
|
Ohtani, T; Ogi, H.;
Morishita, T. and Hirao, M.
|
Noncontact
Ultrasonic Spectroscopy for Detecting Creep Damage in 2.25CD-1MO Steel
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
139-144
|
|
Park, Y.M., Song,
S.K., Jung, J.K., Seo, Y.M. and Choh, S.H.
|
14N NQR Investigations of the Mixed Complex Systems;
[NaNO2] 1-x[ANO3]x:A=K,
Na
|
Jrnl of the Korean
Physical Society, Vol 32, Feb 1998, pp. S690-S692
|
|
Park, Y.M.; Song,
S.K.; Seo, Y.M.; Jung, J.K. and Choh, S.H.
|
14N NQR Study of Mixed Complexes
(NaNO2)
1-x(ANO3)x:(A=K,Na)
|
Verlag der Zeitschrift
fur Naturforshung, XIVth Int'l Symposium on Nuclear Quadrupole Interactions,
Pisa, Italy, July 20-25, 1997
|
|
Petersen, GL; Bray,
PJ; Marino, RA
|
A New Pulsed
Nuclear Quadrupole Resonance Spectrometer
|
Z. Naturforsch. 49a
1994
|
|
Petersen,GL; Chick,
BB; Fortunko, CM; Hirao, M
|
Resonance
Techniques for Elastic-Wave velocity Determination in Thin Metal Plates
|
Rev Sci Instr 65
(1) Jan 1994 pp 192-198
|
|
Petersen, G.; Chick,
B. & Fortunko, C.
|
A Versatile
Ultrasonic Measurement System for Flaw Detection and Material Property
Characterization in Composite Materials
|
|
|
Petersen, GL
|
Low Frequency
NQR Matching Network
|
The NQR Newsletter,
edited by, RA Marino, 1-2, p 20
|
|
Winner of the 1997
ASNT Outstanding Paper, Materials Evaluation
|
|
Schramm, Raymond
E., Szelazek, Jacek, and Clark, A Van
|
Ultrasonic
Measurement of Residual Stress in the Rims of Inductively Heated Railroad
Wheels
|
Materials Evaluation
Vol 54 No 8, August 1996, pp 929-934
|
|
Sohn, C.W., Jung,
J.K., Seo, Y.M., Choh, S.H., Park, Y.M. and Song, S.K.
|
Impurity
Effects on 14N NQR in Mixed Systems; [(CH2)6N4]1-x
[KNO3]x and [(CH2)6N4]1-x[SC(NH2)2]x
|
Jrnl of the Korean
Physical Society, Vol 32, Feb 1998, pp. S639-S642
|
|
Solodov, I.Y.
|
Nonlinear
NDE Using Contact Acoustic Nonlinearity (CAN)
|
|
|
Stekel, A ;Sarrao,
JL; Bell, TM;Lei, M; Leisure, RG;Visscher, WM; Migliori, A
|
Method for
Identification of the Vibrational Modes of a Rectangular Parallepiped
|
J Acoust Soc Am 92
(2) Pt 1 Aug 1992 pp 663-668
|
|
Thompson, RB; Gray,
TA
|
Range of
Applicability of Inversion Algorithms
|
|
|
Xing Li; Zuoqing
Wang;Cheng Kuei Jen; Martin Viens; David Cheeke
|
Ultrasonic
Thin-Walled Tube Wave Structure for Sensing Devices
|
IEEE transactions
on Ultrasonics... Vol 43 No 2 Mar 96 pp 331-336
|
|
Yamasaki, T and Hirao,
M.
|
Nondestructive
Stress Measurement in Steel Using Magnetostriction
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
665-670
|
|
Yamasaki, T; Tamai,
S and Hirao, M
|
Flaw Detection
in Steel Wires by Electromagnetic Acoustic Transducers
|
Nondestructive Characterization
of Material VIII, ed Robert Green, Plenum Press, New York, 1998, pp.
733-738
|
|
Yamasaki, T; Tamai,
S and Hirao, M
|
Arrayed-Coil
EMAT for Longitudinal Wave in Steel Wires
|
|
|
Yost, W & Cantrell,
J
|
The Effects
of Artifical Aging of Aluminum 2024 on its Nonlinearity Parameter
|
Rev of Prog in QNDE,
Vol 12, Thompson & Chimenti eds, Plenum, New York, 1993, pp 2067-2073
|
